 Window Crank |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| Pursang |
 Aug 10 2026, 04:44 PM
Post
#1
|
|
Member  Group: Members Posts: 252 Joined: 19-January 13 From: Beaverton Member No.: 15,386 Region Association: Pacific Northwest  |
I had some work done on the inside of the driver's door when a screw blocked the latch handle. That is fixed now, but I noticed that the window crank is no longer parallel with the passenger side crank like it used to be. My question is, does the pivot end of the crank handle press onto the spines of the roller shaft? Can I use a flat blade to pry the handle off of the shaft and then press it back on in alignment with the inside handle on the passenger door? Thanks.
|
   |
 
|
| dtmehall |
Aug 10 2026, 04:58 PM
Post
#2
|
|
Member Group: Members Posts: 343 Joined: 21-December 23 From: Michigan Member No.: 27,808 Region Association: Upper MidWest |
there is a plastic cover that needs to be moved to the side. that will give you access to a phillips head screw. remove that screw and should be able to remove the window crank, and reposition it to the way yo want it
|
 |
|
| dtmehall |
Aug 10 2026, 05:00 PM
Post
#3
|
|
Member Group: Members Posts: 343 Joined: 21-December 23 From: Michigan Member No.: 27,808 Region Association: Upper MidWest |
be careful, if you try to use a screwdriver you could damage the door card upholstery
|
|
|
|
| Shivers |
Aug 10 2026, 05:02 PM
Post
#4
|
|
Senior Member Group: Members Posts: 3,515 Joined: 19-October 20 From: La Quinta, CA Member No.: 24,781 Region Association: Southern California |
QUOTE(Pursang @ Aug 10 2026, 03:44 PM)  I had some work done on the inside of the driver's door when a screw blocked the latch handle. That is fixed now, but I noticed that the window crank is no longer parallel with the passenger side crank like it used to be. My question is, does the pivot end of the crank handle press onto the spines of the roller shaft? Can I use a flat blade to pry the handle off of the shaft and then press it back on in alignment with the inside handle on the passenger door? Thanks. Under the black plastic on the handle is a screw. Pop the plastic up, undo the screw, move the handle and put it back together.  |
|
|
|
| Pursang |
Aug 10 2026, 05:43 PM
Post
#5
|
|
Member Group: Members Posts: 252 Joined: 19-January 13 From: Beaverton Member No.: 15,386 Region Association: Pacific Northwest |
Thanks, guys.
|
|
|
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th August 2026 - 09:15 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.